Aller au contenu

Infrared Heater vs Electric Radiator: Costs & Comfort

Infrared panels, electric convectors and inertia radiators all use electricity to provide heat. The main difference is how that heat reaches people an

Infrared heater vs conventional electric radiator: what is the difference?

Infrared panels, electric convectors and inertia radiators all use electricity to provide heat. The main difference is how that heat reaches people and surfaces, how the system is controlled, and the practical fit for a room. None of these direct resistance heaters produces multiple units of heat from one unit of electricity.

How the main heating options compare

System How it heats Main considerations
Electric convector Mainly warms room air Simple installation, comfort depends on air movement and room layout
Electric inertia radiator Heats a mass that releases heat over time Different response and comfort characteristics; resistance heating remains 1 kWh input to roughly 1 kWh of heat
Infrared radiant panel Radiates heat towards occupants and surfaces, with some convective heating Placement, unobstructed surface and heat demand are important; decorative finishes may be available
Air-source heat pump Transfers heat from outdoors using electricity Can supply more heat energy than the electricity consumed; performance depends on operating conditions and system design

Does infrared heating use less electricity than a convector?

Not when both operate at the same power for the same amount of time. A 600 W infrared panel and a 600 W convector each use 0.6 kWh in one hour at full power. Running costs depend on the thermostat, heat losses, settings and hours of operation, not simply on the term “infrared”.

When might a radiant panel be appropriate?

It may be a useful option for a properly sized room, intermittent use, selected occupied zones, or where a discreet or decorative wall finish is desired. In poorly insulated buildings, insulation improvements should be considered before increasing electric heating capacity.

When might a heat pump be preferable?

A well-designed heat pump often has a much lower electricity demand for whole-building heating because it moves thermal energy instead of producing heat solely through electrical resistance. Its installation requirements, upfront costs and maintenance differ from those of a wall panel.

Choosing a heater for your home

Begin with the room’s heat requirement and the intended use. Read our sizing guide and wall-mounted installation considerations. If visual design is important, discover decorative infrared picture heaters. Ask Thermadeco about the models available.

← Back to the English guides · Lire cette page en français

Une question sur votre projet ?

Je souhaite être rappelé

Laissez votre numéro : nous vous rappelons gratuitement, sous 24 h ouvrées.

Recommander ce site à un ami

Envoyez le lien de cette page avec l'application de votre choix.

Par e-mail Par WhatsApp Par SMS